Standard .093″ Pin and Socket Connectors

Molex Standard .093″ Pin and Socket Connector

SCT6700 Series is Scondar’s Line of Reliable .093” Pin and Socket Connector Likened to the Molex Brand

Scondar offers SCT6700 Series, a replacement and cheaper alternative of the Molex .093” pin and socket connectors for 5.03mm pitch and 6.71mm pitch 3191 wire-to-wire connectors. This has an industry standard 2.36mm diameter terminals and can either be incorporated in crimp housings or crimp receptacles carrying up to 14.0 A (9.0 A) with the largest circuit size housings and 17.0 A with high-current and low-force terminal.

Molex 6.7mm pitch connector with standard .093” pin and socket is most suitably in medium-power applications. Scondar offers this in a complete package with a male housing, female/receptacle housing, female and male terminal, all manufactured with precision-fitting and durability ensuring accurate mating.

Not only is this available in wire-to-wire configurations, but also for wire-to-board configuration with up to 15 circuits. Also, Scondar showcases other features such as positive lock and TPA secondary lock, single row system and spring style mounting ears.

The SCT6700 is compatible with AWG 16-20 wire and its capabilities can vary from signal transmission to power delivery.

Features

Allows for Greater Design Flexibility

The crimp terminals can be used in plug or receptacle housings, available with tin or gold plating.

Exceedingly High-current Terminal Available

Molex 6.7mm pitch connector with a standard .093” pin and socket can be used for applications up to 17A.

Reliable Polarization Feature and Easy Harness Assembly

This product is offered with reliable polarization and features easy harness assembly to reduce time and cost during installation.

Reliable TPA Feature

The variety of Terminal Position Assurance (TPA) types, not only facilitates correct mating, but also gives the insurance that terminals are fully locked in the correct position.

Accept both male and female terminals

The housing will accept both male and female terminals, and are polarized to eliminate and prevent mismating.

Facilitates heat dissipation and low engagement force

The different wire-to-wire connector types are equipped with RMF solutions for lower friction solution between the contacts, making insertion and removal of the device easier, while eliminating the need for complex mechanisms.

Applications

Automotive and Commercial Vehicle

• Mechanical Chassis Optimization
• Thermal Management
• Thermal Simulation

Consumer

• Air conditioner
• Air purifier / dehumidifier
• Copiers
• Printers
• Refrigerator
• Washing Machine
• Printed Electronics Design and Development
• Printed Electronic Inks
• Printed Electronic Substrates
• Printed Electronics Manufacturing
• Magnesium Thixomolding Capability

Appliances

• Thermal Management
• Thermal Simulation
• RF Microwave Solutions
• RF/Microwave Production Capabilities
• Fitness Equipment
• Microwave oven
• Washing machine

Industrial

• Copiers
• Printers
• Desktop computer and motherboard
• Hard disk drive

Medical

• Telecommunications
• High-Speed Channel Design
• Signal Integrity Analysis

Material and Packaging of Molex Standard .093” pin and socket and Molex 6.7mm Pitch Wire-to-Wire Connector

Using a UV-Resistant Thermoplastic Material for Enhanced Connector Performance

The housing components are injection molded Nylon66,UL 94V-0. These are scientifically proven to resist UV-radiation than normal plastic, making sure the connectors are well-protected, reducing risk for early degradation and increased cycles/minute of the connector subjected to harsh environments.

Tape and Reel Packaging for SMT Components

Scondar uses a state-of-the-art tape and reel equipment to package a variety of components.

The tape and reel packaging strip has accurately sized cavities for the terminal height, width and depth, secured tightly, maintaining consistent position during transportation.

You can expect that your wire-to-wire connector package is undisturbed during the trip and has maintained its vitality even during your production stages, which is why a lot of our customers has raved about our product for both cheaply-priced and, at the same time, resembles the Molex 6.7mm pitch wire-to-wire product with an industry standard .093” pin and socket in performance and quality.

The complete package will include the following:

Female terminal: 10,000 pcs/reel, brass material and tin-plated finish
Male terminal: 10,000 pcs/reel, brass material and tin-plated finish
Female Housing (Nylon 66, UL94V-0 500): 1000pcs/bag
Male Housing (Nylon 66, UL94V-0 500): 1000pcs/bag